第一、把門框放平在地上,連接好上軌;下軌與邊框的鑼絲或角碼。
第二、把門框放進洞口。
第三、用木尖調整好框的水平垂直度。
第四、把門框固定在墻上。
第五、把門扇放進已裝好的門框上。
第六、把門扇推到邊框的位置,看一下是否與門框的水平、垂直度一致。
第七、把鎖扣對正鎖點相應的位置,再把它固定在邊框上。
First, put the door down, well connected on the lower rail and rail; the border wire gongs or corner.
Second, the door into the hole.
Level third, with wooden tip verticality adjusting well frame.
Fourth, the door frame is fixed on the wall.
Fifth, the door into the installed on a door frame.
Sixth, the door is pushed to the border position, see whether level and verticality and door frame agreement.
Seventh, lock is lock points on corresponding position, then it is fixed on the frame.
相關標簽: